Jump Starting
3. Connect one juniper cable to the
positive ( + ) terminal on the
booster battery. Connect the other
end to the positive (+) terminal
on your Honda's battery.
4. Connect the second juniper cable
to the negative (—) terminal on
the booster battery. Connect the
other end to the grounding strap
as shown. Do not connect this
jumper cable to any other part of
the engine.
5. If the booster battery is in another
car, have an assistant start that car
and run it at a fast idle.
6. Start your car. If the starter motor
still operates slowly, check the
jumper cable connections to make
sure they have good metal-to-
metal contact.
7. Once your car is running, discon-
nect the negative cable from your
car, then from the booster battery.
Disconnect the positive cable from
your car, then the booster battery.
Taking Care of the Unexpected
BOOSTER
BATTERY
To Next Page
Loading...
Need help?
General
