−−
−＋
CONTINUED
The scan function gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
SCAN, press the SCAN button. To
scan with the interface dial, scroll
down, and push the interface
selector to the right. You will see
SCAN on the screen and audio
display.
The system plays each channel in
numerical order for a few seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, push the
interface selector to the right again
or press the SCAN button to cancel.
Press either side of
the bar ( or ) to select another
category.
Playing the XM Radio (Models with navigation system)
SCANCATEGORY
Features
269
10/01/26 19:08:58 31SZA620_274
To Next Page
