The spare tire is stored
underneath the rear cargo area.
Remove the plastic cover and the
rubber cap on the cargo area
lining to access the shaft for the
sparetirehoist.
Put the extension with the wheel
nut wrench on the hoist shaft.
Turn the wrench
counterclockwise to lower the
spare tire to the ground.
The tools and jack are under the
cargo area behind a cover on the
passenger’s side. Remove the
cover and take the jack out of the
tool kit case.
Fold down the third row seat (see
page ).
5. 6.
7. 8.
161
Changing a Flat Tire
510
COVER
KNOB
PLASTIC COVER
WHEEL NUT
WRENCH
The wheel nut wrench supplied with
your vehicle is specially adapted to fit
the hoist shaft. Do not use any other
tool.
10/01/26 19:51:30 31SZA620_515
To Next Page
Loading...
