This indicator has two functions:
Itcomesonwhenyouturnthe
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you drive with the
parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tires.
You will also see a ‘‘RELEASE
PARKING BRAKE’’ message on
the multi-information display (see
page ).
If it remains on after you have
fully released the parking brake
while the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page .
You will also see a ‘‘LOW BRAKE
FLUID’’ or ‘‘CHECK BRAKE
SYSTEM’’ message on the multi-
information display (see page ).
1.
2.
95
523
95
On vehicles with navigation system
On vehicles with navigation system
Instrument Panel Indicators
Parking Brake
and Brake
System
Indicator (Red)
Instruments and Controls
71
U.S. Canada
10/01/26 18:35:05 31SZA620_076
To Next Page
Loading...
