Changing of speed and mileage unit
a
Turn the ignition switch to the ON position.
b
Press and hold
SEL
button and
SET
button.
c
Press
SEL
button to select either “km/h” and “km” or “mph” and “mile”.
d
Press
SET
button.
The speed and mileage unit is set, and then the display returns to the ordinary display.
u The speed and mileage unit can also be set by turning the ignition switch to the OFF position.
20210315181452_31K2EA000_enu_BOOK Page 25 Monday, March 15 2021 18:17:29 JST
Operation Guide
22
Instruments (Continued)
To Next Page