Storage Equipment
Seat
#
Open
Insert the ignition key into the seat lock and
turn it clockwise to unlock.
#
Close
Close and push down on the rear of the seat
until it locks. Make sure that the seat is locked
securely by pulling it up lightly.
Helmet Holder
The helmet holder is located under the seat.
A helmet set wire is stored in the tool box.
(P.34)
u Use the helmet holder only when parked.
3WARNING
Riding with a helmet attached to the
holder can interfere with your ability to
safely operate the vehicle and could
lead to a crash in which you can be
seriously hurt or killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.
20210315181452_31K2EA000_enu_BOOK Page 36 Monday, March 15 2021 18:17:29 JST
Operation Guide
33
Continued
Helmet holder
Ignition key
To Next Page
Loading...
