EasyManua.ls Logo

Honda UM616 User Manual

Honda UM616
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WEED MOWER
OWNER'S MANUAL
MANUEL DE L'UTILISATEUR
BEDIENUNGSANLEITUNG
MANUAL DE EXPLICACIONES
UM536
UM616
36VD8626
00X36-VD8-6260
Black
DIC649
00X36-VD8-6260 UM536/616
K3
oHonda Motor Co., Ltd. 2002
efgsY1500.2007.06
Printed in Japan
Question and Answer IconNeed help?

Do you have a question about the Honda UM616 and is the answer not in the manual?

Honda UM616 Specifications

General IconGeneral
BrandHonda
ModelUM616
CategoryLawn Mower
LanguageEnglish

Summary

1. SAFETY INSTRUCTIONS

General Safety Precautions

Essential safety warnings and guidelines for operating the weed mower safely.

2. SAFETY LABEL LOCATIONS

4. CONTROLS

Throttle Lever Operation

Explains how to use the throttle lever to control engine speed.

Blade Clutch Lever Function

Describes the operation of the blade clutch lever for blade rotation.

5. PRE-OPERATION CHECKS

Engine Oil Level Check

Procedure to check and maintain the engine oil level.

Fuel Level Check

How to check and fill the fuel tank with the correct gasoline.

Cutting Blade Inspection

How to check the cutting blade for damage or wear before use.

6. STARTING THE ENGINE

Engine Starting Procedure

Step-by-step guide to safely start the engine.

7. OPERATION

Cutting Height Adjustment

How to adjust the cutting height for front and rear wheels.

Engaging Blade and Drive Clutches

Steps to engage the blade and drive clutches for operation.

Stopping Mower on Slopes

Procedures for safely stopping the mower on slopes using brake lever.

8. MOWING

Mowing on Slopes

Safety precautions and techniques for mowing on inclined surfaces.

9. STOPPING THE ENGINE

10. MAINTENANCE

Maintenance Schedule

Overview of recommended maintenance intervals and tasks.

Engine Oil Change Procedure

Detailed steps for changing the engine oil.

Blade Replacement and Installation

Instructions for removing, replacing, and installing the cutting blade.

11. TRANSPORTING/STORAGE

12. TROUBLESHOOTING

Engine Fails to Start

Common causes and solutions when the engine won't start.

Engine Loses Power

Troubleshooting steps for reduced engine power.

Engine Overheating Issues

Causes and solutions for engine overheating.

Blade Not Rotating or Stopping

Troubleshooting when the blade fails to rotate or stops.

Related product manuals