Need help?Do you have a question about the Honda VT750CD ACE and is the answer not in the manual?
General| Brand | Honda |
|---|---|
| Model | VT750CD ACE |
| Category | Motorcycle |
| Language | English |
Inspect, adjust, and lubricate the drive chain for optimal service life.
Check and replace brake fluid every 2 years or 19,200 km for system integrity.
Inspect front and rear brake pads and shoes for wear at regular intervals.
Check front and rear brake systems, including fluid level, pads, and pedal free play.
Ensure brake light switches operate correctly with brake lever/pedal engagement.
Adjust headlight aim for proper road illumination and to avoid blinding oncoming traffic.
Adjust clutch free play at the lever and cable ends to ensure proper engagement.
Check side stand for damage, spring tension, and safety cut-out switch operation.
Inspect front fork and rear swing arm bearings for wear, damage, or looseness.
Check chassis nuts, bolts, and screws for proper torque and security.
Inspect wheel bearings, spokes, and check tire pressure and sizes.
Check handlebar movement for binding or play to inspect steering head bearings.
Inspect fuel lines and filter for deterioration, damage, or leakage.
Check throttle cables, grip operation, and free play for smooth response.
Check SE valve knob and cable for smooth operation and proper adjustment.
Replace air cleaner element approximately every 19,000 km or sooner if conditions require.
Clean the crankcase vent tube and drain trap during routine maintenance checks.
Inspect and replace spark plugs every 12,800 km or as conditions dictate.
Inspect and adjust valve clearances while the engine is cold for optimal performance.
Change engine oil and filter at recommended intervals using SAE 10W-40 4-Stroke Oil.
Procedures for removing and installing front and rear wheels.
Synchronize carburetors for smooth engine operation and proper fuel mixture.
Adjust engine idle speed to 1000 +/- 100 rpm with the engine warm.
Maintain proper coolant level using Honda HP coolant or equivalent.
Check radiator grill, fins, and hoses for obstructions, damage, or leaks.
Steps for replacing worn rear brake shoes and checking drum limits.
Replace front brake pads, ensuring caliper pistons are pushed in.
Procedure for draining, flushing, and refilling the cooling system with proper coolant.
Inspect front brake discs for damage, thickness, and warpage.
Bleed front brake system to remove air and ensure proper lever feel.
Adjust pilot screws for correct idle air/fuel mixture to prevent lean misfire.
Detailed list of torque specifications for various fasteners and engine components.
Technical data and torque values related to engine parts and assemblies.
Technical data and torque values for frame, body, suspension, and steering components.
Specific torque values and details for the hydraulic brake system components.
To Next Page
