Need help?Do you have a question about the Honda WH20 and is the answer not in the manual?
General| Pump Type | Centrifugal |
|---|---|
| Starting System | Recoil |
| Engine Type | 4-stroke, air-cooled, OHV |
| Max Output | 3.5 HP (2.6 kW) @ 3, 600 RPM |
| Fuel Tank Capacity | 2.5 L |
| Max Flow Rate | 600 L/min |
| Max Head | 30 m |
| Suction Head Lift | 8 m |
| Engine | Honda GX120T1 |
| Run Time | 2.5 hours |
| Weight | 47 lbs (21 kg) |
Discusses safety precautions and hazard identification methods used in the manual.
Provides essential safety guidelines for operating the water pump.
Details the operator's role in ensuring safe pump operation and emergency shutdown.
Specifies the correct liquids to pump and hazardous liquids to avoid.
Provides safety instructions for refueling the pump's engine.
Alerts to the hot exhaust system and muffler, and safe operating distances.
Warns about the dangers of carbon monoxide gas from engine exhaust.
Identifies the location and importance of safety labels on the pump.
Identifies the location of all controls and components on the water pump.
Explains the function and operation of the fuel valve lever.
Describes the function and operation of the ignition switch.
Details the function of the choke lever for starting a cold or warm engine.
Explains how the throttle lever controls engine speed and pump output.
Describes the operation of the recoil starter grip for engine starting.
Ensures the user is prepared and knowledgeable before operating the pump.
Guidance on pre-operation checks for the water pump's condition.
Instructions for checking the pump's overall condition, including fasteners and damage.
Guidance on inspecting suction and discharge hoses for proper condition and installation.
Procedures for checking engine oil level, air filter, and fuel level before operation.
Essential safety measures and warnings for operating the water pump.
Recommendations for optimal pump placement to maximize performance and minimize priming time.
Step-by-step guide for installing the suction hose and strainer correctly.
Instructions for installing the discharge hose for optimal fluid friction and output.
Procedure for filling the pump chamber with water before starting the engine.
Step-by-step instructions for starting the water pump engine.
Guidance on adjusting engine speed using the throttle lever for desired pump output.
Explains why regular maintenance is crucial for safe, economical, and trouble-free operation.
Key safety precautions to follow during maintenance and repair procedures.
Provides a schedule for regular maintenance tasks based on time or operating hours.
Instructions and safety precautions for refueling the pump's fuel tank.
Procedure for checking the engine oil level and topping up if necessary.
Step-by-step guide for draining and refilling the engine oil.
Specifies the type of gasoline suitable for the engine, including ethanol limits.
Recommends specific oil types and viscosities based on ambient temperature.
Instructions for inspecting, cleaning, or replacing the air filter element.
Details the cleaning procedures for paper and foam air filter elements.
Procedure for removing and cleaning the fuel sediment cup and filter.
Guide to inspecting, gapping, and replacing the spark plug.
Instructions for servicing the spark arrester, including removal and cleaning.
Steps for preparing the pump for storage to prevent rust and corrosion.
Instructions for cleaning the engine and pump before storage.
Information on fuel deterioration during storage and how to prevent it.
Procedure for draining the fuel tank and carburetor for long-term storage.
Guidance on using fuel stabilizer for short-term storage (30-90 days).
Instruction to change the engine oil as part of storage preparation.
Procedure for lubricating the engine cylinder for long-term storage.
Troubleshooting guide for engine-related issues like not starting or lacking power.
Lists possible causes and corrections for the engine failing to start.
Diagnoses and solutions for when the engine has reduced power.
Troubleshooting guide for pump-related issues like no output or low output.
Identifies causes and solutions for the pump having no water output.
Lists possible causes and corrections for the pump's reduced water output.
Shows the locations of engine and frame serial numbers for identification.
Explains the need for and procedure of carburetor modification for high altitude use.
Details the engine's emission control system and its components.
Symptoms indicating potential issues with the emission control system.
Guidance on using genuine or EPA-certified parts for emissions control systems.
Emphasizes owner responsibility for maintenance to comply with emission standards.
Information on emission durability periods for engines certified in California.
Details the warranty coverage for the engine's emission control system.
Provides detailed specifications for the WH15XT2 model, including dimensions and performance.
Provides detailed specifications for the WH20XT model, including dimensions and performance.
Information on how to find an authorized Honda Servicing Dealer in the USA and Canada.
Details on how to obtain shop manuals and other Honda publications.
Contact information and procedures for resolving issues with Honda Power Equipment.
Quick reference for fuel type and octane rating.
Quick reference for recommended engine oil type and capacity.
Quick reference for spark plug type and gap specification.
Quick reference for initial and subsequent maintenance checks.
To Next Page
