Need help?Do you have a question about the Honey Can Do SRT-03571 and is the answer not in the manual?
General| Brand | Honey Can Do |
|---|---|
| Model | SRT-03571 |
| Category | Indoor Furnishing |
| Language | English |
Includes shelf, front table supports, side table supports, slides, hamper supports, hamper lower support, and table frames.
Includes table frames, screws, bolts, nuts, wooden dowels, hamper bags, and an allen wrench.
Secure front table supports (B) to the shelf (A) using screws (K) and a screwdriver (T).
Attach left table frame (I) and right table frame (J) using screws (O) and a screwdriver (T).
Attach drawer slides (D) to the table frames (J) using dowels (N) and barrel nuts (P).
Fasten the table frame structure using long bolts (L) and an allen wrench (S).
Connect shelf supports (I) and attach dowels (N) for further assembly.
Reinforce the structure using long bolts (L) and an allen wrench (S).
Install hamper supports (E) and lower support (F) onto the hamper frames (G, H).
Fasten the hamper frames (G, H) using barrel nuts (P) and dowels (N).
Connect drawer supports (M) to the frame using long bolts (L) and the allen wrench (S).
Insert rods (R) into hamper bags (Q) for the sorting bins.
Secure the drawer slide mechanisms (O) to the main frame using a screwdriver (T).
Place the assembled hamper bags (Q) with rods (R) into the sorting frame.
Details HCD's warranty against defects in materials and workmanship for normal use.
Advises keeping plastic sheeting away from children to prevent suffocation hazards.
To Next Page
