Honeytek LX1010B+ User Manual

DIGITAL LIGHT METER INSTRUCTION MANUAL
INSTRUCTION
Congratulations on your purchase of the Honeytek LX1010B+ Digital Light
Meter, it is a precision instrument used to measure luminance in the field and
fully cosine corrected for the angular incidence of light. This portable, compact
light meter provides LUX and FC measurements, the light sensitive component
used in this meter is a very stable sensor.
FEATURES
 Light measuring level ranges are from 1Lux to 5000Lux or 1FC to 5000FC
respectively
 High accuracy and rapid response
 Data-Hold function for holding measuring values
 Max-Hold function for holding peak values
 Unit and sign display for easy reading
 Automatic zeroing
 Auto power off
 Meter corrected for luminous efficiency function
 Correction factor need not be manually calculated for non-standard light
sources
 Short rise and fall time
SPECIFICATIONS
General Specifications
Display: 3½ digit back light LCD display (reads 0 to 1999)
Over range indication: OL (over load) is displayed
Measurement rate: 2.0 readings per second approximately
Power supply: One 9V battery (NEDA 1604/JIS 006P/IEC6F22)
Battery life: 200 hours typical
Low battery indication: Battery symbol is displayed when the battery power
drops below the operating voltage
Operation condition: Temperature: 0℃ to 60℃ (or 32℉ to 104℉)
Humidity: 10 to 80%RH
Storage condition: Temperature: -10℃ to 60℃ (or 14℉ to 140℉)
Humidity: 10 to 70%RH
Dimension: 224(L) x 73.6(W) x 32(H) mm
Weight: 215g
Accessories: Instruction manual, battery
Electrical Specifications
Measuring ranges: 2000, 20,000 and 50,000 Lux

Honeytek LX1010B+ Specifications

General

Brand	Honeytek
Model	LX1010B+
Category	Measuring Instruments
Language	English

Summary

Instruction and Features

Instrument Overview

Congratulations on your purchase of the Honeytek LX1010B+ Digital Light Meter, a precision instrument for measuring luminance.

Key Features

Highlights include light measuring ranges, high accuracy, rapid response, data-hold, max-hold, unit display, auto power off, and corrected luminous efficiency.

Specifications

General Specifications

Details on display, over range indication, measurement rate, power supply, battery life, operation, storage, dimensions, weight, and accessories.

Electrical Specifications

Focuses on the measuring ranges available for Lux measurements.

Performance Metrics

Covers accuracy, spectral response, cosine response, repeatability, and temperature characteristics.

Operating Instructions

Measurement Procedure

Step-by-step guide on setting units, selecting ranges, positioning the detector, and reading values.

Data-Hold Function

Instructions on how to activate and exit the data-hold mode for freezing measurements.

Maintenance and Battery

Battery Check-Up and Replacement

Guidance on recognizing low battery indication and replacing the battery.

General Maintenance

Cleaning the detector, storage conditions, and recommended periodic calibration for accuracy.