Honeywell Home PLS730B User Manual

The PLS730B / PLS731B programmable wall switch has been designed to control lightings and
motors:
NOTE: This switch cannot be used if there are not at least 2 white wires joined by a connector inside
the electrical box.
1) Cut power at the circuit breaker to avoid electric shock.
2) Remove the existing switch.
3) Install the new switch as shown in the diagram below.
4) Apply power at the circuit breaker.

Applications
Load type Maximum load Examples
Resistive load
2400 W
(20 A @ 120 V)
• incandescent lights
• halogen lights
• block heater
Inductive load
2400 W
(20 A @ 120 V)
• fluorescent lights
• compact fluorescent lights (CFL)
• sodium lamps
• electronic ballasts
Motor 1 hp
• pool filter pumps
•fans

Installation
120 VAC (line)
white (neutral)
black (line)
blue (load)
Load
PLS730B / PLS731B
Installation and User Guide
Programmable Wall Switch
69-2503EFS-05

Honeywell Home PLS730B Specifications

General

Brand	Honeywell Home
Model	PLS730B
Category	Switch
Language	English

Summary

Installation

Power-On

Display Behavior on First Power-Up

Explains potential blank or dim screen on first power-up and expected behavior.

Setting the Clock

Selecting the Operating Mode

Manual Mode

Explains manual operation where the switch acts as a regular switch.

Automatic Mode

Describes automatic mode following programmed schedules and temporary overrides.

Programming the Schedule

Clearing a Programmed Time

Instructions on how to erase programmed schedule times.

Troubleshooting

Blank Display Troubleshooting

Steps to take if the device display is blank.

Faded or Irregular Display

Addresses issues with display clarity or consistency.

Format Switching Issues

Guidance for problems switching between 12-hour and 24-hour display formats.

Program Execution Issues

Troubleshooting steps when programmed schedules do not function correctly.

Unexpected Reset with Inductive Loads

Explains resets caused by inductive loads and the solution.

Technical Specifications

Warranty Information

Customer Assistance