EasyManua.ls Logo

Honeywell 2050 User Manual

Honeywell 2050
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation & Installation Guide
Model 2050 / 2050E
Read These Instructions Very Carefully!
Limited Warranty
Home and Office Security Safes
MHAS2050E0807
ENGLISH
If your Honeywell safe fails to operate because of a manufacturing defect any time up to five (5)
years from the date of original purchase, we will, at our discretion, repair or replace the unit at no
charge to the original owner. A copy of your sales receipt is required as Proof of Purchase.
The consumer must first contact SISCO® Customer Service (800-223-8566, USA and Canada;
310-638-1182 outside of USA and Canada, or via E-mail at customerservice@honeywellsafes.com)
during the Term of the Limited Warranty for authorization on the repair or replacement of the safe.
For the repair of the safe, SISCO Customer Service may provide approval for taking it to a local
locksmith. For the replacement of the safe, the consumer must return it, prepaid, to SISCO
(2835 E. Ana St., Rancho Dominguez, CA 90221). SISCO will replace the safe with a comparable
model, shipping prepaid.
WHAT IS NOT COVERED
SISCO’s responsibility and the consumer’s rights are limited to the repair or replacement of the
defective safe, as stated above.
This Warranty does not apply if the product has been damaged by improper installation, neglect,
accident, misuse, exposure to extremes of heat or humidity, terrorism, war, acts of God, or as a
result of service or modification by other than an authorized service center. While your SISCO safe is
warranted to be free of mechanical defect during the Term of Limited Warranty, the Warranty does
not apply to the finish of the safe.
SISCO is not responsible for any costs associated with removing or installing this product.
SISCO is not responsible for damage or loss of the contents of the safe nor for the unauthorized
removal of contents.
SISCO is not responsible for any damages incurred to the safe during shipment.
This Limited Warranty applies only to new SISCO safes, purchased by the original owner, and is not
transferable to second owners or “factory seconds” safes purchased by the consumer.
No implied Warranty of salability or fitness exists other than those descriptions provided on the
packaging, instructions and advertising. No other covenants or warranties, either implied or stated,
written or oral, are hereby present. Some states do not allow limitations on how long an implied
Warranty lasts, so the above limitations may not apply to you.
This Warranty gives you specific rights and you may also have other rights which vary from state to
state.
The Honeywell trademark for Home/Office Safes is used with permission. Honeywell Safes are
distributed exclusively by SISCO. Honeywell makes no representations or warranties with respect to
this product or service. The Honeywell Trademark is used under license from Honeywell Intellectual
Properties Inc. by SISCO.
Question and Answer IconNeed help?

Do you have a question about the Honeywell 2050 and is the answer not in the manual?

Honeywell 2050 Specifications

General IconGeneral
Shelves1 Adjustable Shelf
ColorBlack
MaterialSteel
Lock TypeElectronic keypad
Fire Resistance1 hour at 1700°F

Summary

Overview of Your Safe

Opening Safe For The First Time

Opening Your Safe Using the Pre-set Factory Code

Instructions for initial safe opening using the factory passcode and the digital keypad.

Security Lockout Features

Details on how the safe locks out the keypad after multiple incorrect passcode entries.

Closing Your Safe

Steps to properly close and secure the safe after accessing its contents.

Programming a Personal Passcode

Programming Your Personal Passcode

Guide to changing the factory passcode to a personalized 3-9 digit code for enhanced security.

Testing Your New Passcode

Procedure to verify the newly programmed personal passcode functions correctly.

Using the Emergency Override Key

Accessing the Safe with the Override Key

Step-by-step instructions on how to use the emergency key to open the safe.

Checking, Changing and Installing New Batteries

Checking Battery Status

How to check the battery level using the keypad and LED indicators.

Changing and Installing New Batteries

Instructions for replacing the safe's batteries with new ones.

Additional Features

Mounting Hardware Kit

Details on using the included hardware to secure the safe to walls or floors.

Use, Care and Maintenance

Safe Care and Maintenance

Recommendations for maintaining the safe's performance and appearance.

Customer Support

Safe Identification Numbers

Importance of identifying and recording model, serial, and key numbers for support.

How to Contact Customer Service

Contact details and required information for customer assistance.

Ordering Replacement Keys

Process for ordering additional or replacement keys for the safe.

Payment and Delivery

Information on payment methods and delivery for replacement keys.

Limited Warranty

What is Not Covered by Warranty

Exclusions from the safe's limited warranty coverage.

Related product manuals