Honeywell 8EP416 - Codes (contd); To change User code

Accenta/Optima Engineer’s Manual
29
Codes (contd)
To change the other codes: Press the to move through the codes.
[2] = User 2
[3] = Duress
[4] = Engineer
LCD Keypad:
To change User code:
• Press [8] on the keypad or press for Codes. Then press .
• Press the [1] or on the keypad to edit user code.
• Enter the new [4-digit code].
• Upon the last keypress the code is saved.
8>User 1
Edit Code
----
Code Saved
[8] or then
[1] or
[4-digit code]
LED Keypad:
To change User code:
• Press [8] to edit user code. LED’s 1-4 are on.
• Press [1] or
to edit user code 1. LED’s 1-4 are on.
• Enter the new 4-digit code.
• Upon the last keypress the new code is saved.
• To leave menu press
twice.
The other codes are changed in a similar manner from step 2;
Press [2] for User 2
Press [3] for Duress code
Press [4] for Engineer code.
NOTE: To delete the 4-digit code from User 2 or Duress, enter into Edit Code and press .
[8]
12
3
4
5
6
7
8
[1] or
[4-digit code]
12
3
4
5
6
7
8
12
3
4
5
6
7
8