Honeywell Aspire - Receive a Call; End a Call; Figure 10 Incoming Call Screen

OPERATOR’S MANUAL
OM - 23-15-85 Page 19
3 Oct 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell.
3.3.2 Make a Call from the Call History or Contacts Screen
1. Slide the Dialer screen to the left to open the call History screen, or to the right to open the
Contacts screen.
2. Touch next to the number to call.
3.4 Receive a Call
When an incoming call is observed on the handset, touch Answer to accept the call, or Decline to
ignore the call. The Incoming Call screen displays the caller number or the caller ID (name) during the
incoming call notification.
Figure 10 Incoming Call Screen
3.5 End a Call
1. To end a call, touch .
When a call is ended, the Call Ended screen is displayed.