EasyManua.ls Logo

Honeywell CT47 Series - Power On the Computer; Unlock the Screen

Honeywell CT47 Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
About the USB Type C Connector
You can use the provided USB cable to charge the mobile
computer from a host device (e.g., laptop or desktop computer).
The connected host device must supply a minimum power
output of 5V, 0.5A to the CT47 or the battery will not charge.
Turn Power On/Off
The first time you power On the computer, a Welcome screen
appears. You can either scan a configuration barcode or use the
Wizard to manually set up the computer. Once setup is
complete, the Welcome screen no longer appears on startup
and Provisioning mode is automatically turned off (disabled).
To turn the computer On:
•Press and hold the Power button for approximately 3 seconds,
and then release.
To turn the computer Off:
1. Press and hold the Power button until the options menu
appears.
2. Tap Power off.

Other manuals for Honeywell CT47 Series

Related product manuals