Honeywell CT47 Series Quick Start Guide

5
Install a Nano-SIM Card(s)
For CT47X1N models only. Either a nano-SIM card or embedded
SIM (eSIM) is used to activate the phone and connect to a
mobile network. Supported SIM type and activation method
varies by model and model configuration. Refer to the user
guide for additional information on eSIM or dual nano-SIM
activation and provisioning.
Note: Always power Off the computer before attempting to install or
remove a card.
* SIM 2 availability and type (i.e., eSIM or nano-SIM socket) are model
and model configuration dependent.
SIM 1
SIM 2*
(optional)
1
2 3
4 5 6
Screw for
securing door
(optional)

Honeywell CT47 Series Specifications

General

RAM	4 GB or 6 GB
Storage	64 GB or 128 GB Flash
Camera	13 MP rear
Connectivity	Bluetooth 5.1
Durability	IP68
Barcode Scanner	Integrated 1D/2D imager