Need help?Do you have a question about the Honeywell Dolphin Power Tools and is the answer not in the manual?
Provides an overview of Dolphin Power Tools and their applicability to different terminals.
Lists the mobile device and desktop platforms required for Dolphin Power Tools.
Describes how to access the main window of Dolphin Power Tools on different device types.
Explains how to acquire and install upgrades for Dolphin Power Tools.
Introduces EZConfig as a suite for configuring Dolphin terminals.
Explains the EZConfig Editor's role in creating and editing EXM files.
Describes the EZConfig Client's function in decoding bar codes.
Explains how EZConfig Editor embeds EXM files into bar codes for deployment.
Describes how to work with keys within EXM files for configuration.
Describes how to save EXM files directly to the terminal.
Introduces DeviceConfig.exe and its configuration file.
Describes how to enable sections and keys for DeviceConfig functionality.
Explains the purpose of the DeviceConfig.exm file for terminal settings.
Describes the Radio Manager section for configuring radio settings.
Describes the Security section for WLAN configuration.
Explains how to configure ActiveSync connection parameters.
Explains the startup sequence and lists two startup Power Tools.
Autorun's function in launching applications after resets.
Describes AutoInstall.exe for installing CAB files from the AutoInstall folder.
Defines system parameters for application launch.
Explains ScanWedge's function of sending decoder data as keystrokes.
Describes how to enable ScanWedge by tapping its icon.
Explains how ScanWedge interprets data from the decoder, serial port, and IrDA.
Specifies decoder settings for ScanWedge.
Explains ScanWedge data formatting support.
Defines virtual key map settings for decoded ASCII characters.
Explains BattMon for programming terminal LEDs to monitor battery status.
Explains HotKeys for activating hardware button assignments.
Provides steps to reboot the Dolphin terminal using the Reboot icon.
Describes Suspend for putting the terminal into Suspend mode and waking it.
Explains SysInfo for viewing system information like firmware and parameters.
Explains that the Battery Analyzer helps manage battery power.
Lists items needed for the Battery Analyzer to work.
Describes the three steps of the battery analyze cycle.
Guides on how to manually stop the battery analyze cycle.
Introduces the registry and RegEdit as an editing tool.
Guides on drilling down and modifying registry entries.
Guides on loading REG files onto the terminal.
Explains exporting specific settings and backing up the entire registry.
Explains how to restore the registry using the _RegBackup.reg file.
Explains EZMenu for formatting application windows and launching programs.
Lists default menu configuration files in the \IPSM folder.
Guides on modifying menu configuration files in EZConfig Editor.
Lists keys in child sections for programs, locked to value changes only.
Guides on programming menu files to block access to Start, OK, and Command bars.
Guides on accessing Network Utilities on different Dolphin models.
Introduces IP Config, Ping, and Route as DOS-prompt mirroring utilities.
Explains IP Config for displaying, releasing, and renewing IP parameters.
Describes Ping for verifying network links and IP address functionality.
Explains Route for viewing and editing packet routing rules.
Introduces tools to backup and restore radio settings.
Explains SetRAM for reconfiguring memory distribution on WM 5.0 terminals.
Describes WM 5.0's persistent file store and lack of dynamic RAM adjustment.
Provides steps to access SetRAM from the Power Tools main window.
Explains how DeviceConfig handles RAM allocation settings.
Introduces the two print utilities: BTPrint.exe and Print Demo.
Explains BTPrint for command-line printing to Bluetooth printers.
Provides contact information for technical assistance by region.
Directs users to www.honeywellaidc.com for online technical assistance.
To Next Page
General