Honeywell DT92E Manual

Locating the Room Thermostat
For best performance, install in an open space where DT92 can sense the room temperature,
and where the signal strength is high. The Room Thermostat can be mounted on a wall or on
the optional table stand. Leave at least 30cm distance from any metal objects and at least 1
metre from any other electrical equipment. Select the preferred location
Mounting the Room Thermostat

Honeywell DT92E Specifications

General

Display	LCD
Power Supply	2 x AA batteries
Temperature Range	5°C to 35°C
Mounting	Wall-mounted
Switching Current	3 A
Switching Voltage	230 V AC
Backlight	No
Type	Digital Room Thermostat
Compatibility	Heating systems
Dimensions	92 x 92 x 27 mm
Weight	150g
Control Mode	TPI (Time Proportional Integral)