Chapter 3: Scanning Function
User Guide for ScanPal50 Series Terminal
45
Image settings
There should be no need for users to change image color rendering. Covering the
recommended value is disabled by default. Recommended image settings can be applied in
many environments; only the users who have more in-depth understanding on the image
can change the settings.
Trigger settings
Trigger settings can set up the using patterns for scan key.
Trigger settings
Settings
Description Default
Decoding timeout
If the scan trigger is held down but decoding
is not successfully performed, Scanning will
automatically shut down after 20 seconds
20
To Next Page
Loading...
Need help?
General