Chapter 7: Configuring Terminal
User Guide for ScanPal50 Series Terminal
67
Note: Proxy server settings only apply to the Wi-Fi networks that users modified.
Users have to set proxy servers for each network that requires the using of proxy
server.
1. Enter Application Settings screen, tap Wi-Fi to show available Wi-Fi networks.
2. Long press the network name, then tap Connect the Network, then a network setting
list will pop up.
3. Choose Show Advanced Options at the bottom of the network setting list.
4. If the network does not have proxy server settings, tap None on the proxy server
setting list, and then tap Manual Settings.
5. Enter the network proxy server settings.
6. Tap Save.
Disable Wi-Fi notifications
Wi-Fi is enabled by default. Users will receive notifications in the Status Bar when the
terminal finds wireless networks. Users can disable these notifications.
1. Enter Application Settings screen.
2. Tap WLAN bar.
3. Tap the Settings icon on the top right.
4. Tap Advanced to display Wi-Fi Advanced Menu.
5. Uncheck the Network notification to disable Wi-Fi Notifications.
To Next Page
Loading...
