Chapter 7: Configuring Terminal
70
User Guide for ScanPal50 Series Terminal
4. Tap the name of the certificate or key storage to install. Following the tips to enter the
password of the key storage, then tap OK.
5. Enter the certificate name and tap OK.
Disable or delete certificates
If the certificate is a stolen one or the organization selected by the user does not trust the
certificate, the user can disable or delete the certificate.
1. Enter Application Settings, tap Safety > Trusted Credentials. There are two tabs in
the Trusted Certificate screen:
• System tab displays CA certificates installed in ROM.
• User tab displays CA certificates installed by users.
2. Tap the certificate name to disable or delete it, and the certificate details screen will
pop up.
3. Slide the screen down to the bottom, tap Disable (system certificates) or delete (user
certificates).
If necessary, users can enable the disabled system certificate here. For deleted user
certificates, users must reinstall it to enable it again.
4. Tap OK.
To Next Page
Loading...
Need help?
General