Chapter 7: Configuring Terminal
72
User Guide for ScanPal50 Series Terminal
4. (Optional) If the desired device is not listed, please check if the Bluetooth of that
device has been enabled and is detectable, and then tap Scan Device.
5. Select the device to pair with. After Pairing Dialog Box is displayed, enter the device
PIN code, and tap OK. When the device and the terminal s have been successfully
paired, the device name will appear in the list of paired devices at the top.
6. To disconnect with the paired device, tap the Quick Setting icon beside the device
name
, and then tap Cancel Pairing.
To Next Page
Loading...
