Honeywell Ex-Or MS1500P User Manual

Standard Series LightSpot
MS1500P & MS1500PF
MS1500PF MS1500P
Installation and Commissioning
Instructions
W4006K
At the end of their useful life
the packaging and product
should be disposed of via a
suitable recycling centre.
Do not dispose of with normal
household waste.
Do not burn.
Technical Data
OPERATING VOLTAGE: 230V 50Hz (UK & Europe)
MAXIMUM RECOMMENDED MOUNTING HEIGHT: 5 metres
SWITCH CAPACITY: 10 Amps
Incandescent lamps: 1500W max (at 230V)
TERMINAL CAPACITY: 2 x 1.5mm or 1 x 2.5mm
WEIGHT: 148g
TIME DELAY: 5, 10 or 15 mins
POWER-UP CONDITION: select ON or OFF
DETECTOR RANGE: adjustable - see installation notes
RANGE REDUCTION: adjustable - see installation notes
ULTRASONIC FREQUENCY: 40kHz
PHOTOCELL: adjustable 50 to 5000 lux
SEMI-FLUSH FIXING: requires 76mm hole to be drilled in ceiling tile
Ex-Or
Novar ED&S Limited
Haydock Lane, Haydock, Merseyside WA11 9UJ
Tel: +44 (0)1942 719229
Fax: +44 (0)1942 508753
Email: technicalsales.ex-or@honeywell.com
www.ex-or.com
by Honeywell

Honeywell Ex-Or MS1500P Specifications

General

Brand	Honeywell
Model	Ex-Or MS1500P
Category	Lighting Equipment
Language	English

Summary

Technical Data

Installation and Commissioning Instructions

Installation

Guidelines for mounting the LightSpot detector on a rigid surface or using semi-flush fixing.

Commissioning

Step-by-step instructions for setting sensitivity, photocell, and delay times for optimal performance.

OFF SENSITIVITY

Adjusts sensitivity when lights are OFF. Set to activate at point of entry.

ON SENSITIVITY

Adjusts sensitivity when lights are ON. Set to lowest reliable level.

PHOTOCELL

Prevents lights activation in daylight. Adjust for darker conditions.

OFF DELAY AND POWER-UP CONDITION

Sets time delay after movement before lights switch OFF and defines power-up state.

Technical and Wiring Details

Specifies switching capacity, terminal capacity, and essential wiring information.