FocusPRO
TM
TH5000 Series
3
This thermostat is ready to go!
Your new thermostat is pre-programmed by the installer and ready to use. Just check
the settings below and change if needed:
1. Fan (Auto/On): Preset to Auto .........................................To change, see page 6.
Auto is the most commonly used setting, but you may
prefer On for improved air circulation.
2. System (Heat/Cool/Auto/Em. Heat): Preset to Heat ...To change, see page 7.
You can select heating or cooling, or set the system
to control both systems automatically, if needed.
To Next Page
Loading...
