OperatingManual
/
Auto
Auto Changeover is a feature used in
climates where both air conditioning and
heating are used on the same day:When the
system is set to Auto, the thermostat auto-
matically selects heating or cooling
depending on the indoor temperature.
Press until screen
displays "Auto"
Note: The Auto system setting
may not appear, depending on
how your thermostat was
installed.
Heat and cool settings must lye at least 3
degrees apart.The themaostat will automatically
adjust settings to mah_tain this 3-degree
separation (called "deadband").
The 3-degree separation between heating
and coolh_g set temperatures is fixed, and
cannot lye changed.
14
To Next Page
Loading...
