To Next PageTo Next Page
Need help?Do you have a question about the Honeywell FocusPRO TH6110D1005/U and is the answer not in the manual?
General| Type | Programmable Thermostat |
|---|---|
| Hold Feature | Yes |
| Filter Change Alert | Yes |
| Power Source | 24 VAC |
| Display | Backlit |
| Compatibility | Heat/Cool/Heat Pump |
| Programmable | Yes |
| Weight | 0.5 lbs |
| Terminal Designations | R, C, W, Y, G, O/B |
| Changeover | Manual or Auto |
Press to override programmed temperature control.
Press to set preferred temperature.
Selects function displayed above buttons; functions change based on task.
Identifies warnings, temperature, time, and system status indicators on the display.
Explains SET, FAN, and SYSTEM buttons for controlling thermostat functions and settings.
Configure Wake, Leave, Return, and Sleep periods for optimized heating/cooling schedules.
Step-by-step guide to adjusting weekday and weekend program schedule times and temperatures.
Temporarily change temperature setting; reverts to schedule at next programmed period.
Use HOLD to permanently set temperature, disabling the program schedule until cancelled.
Automatically switches between heating and cooling based on indoor temperature with a 3-degree deadband.
Protects compressor by enforcing a wait time before restarting after shutdown.
Thermostat learns to reach desired temperature by scheduled time, displaying 'In Recovery'.
Instructions for replacing optional backup batteries and when the warning appears.
Provides website and toll-free number for product assistance and inquiries.
Resolves display blank, system response, and temperature setting problems.
Steps to reset the thermostat to its original factory default configuration.
Outlines the 5-year limited warranty, coverage, limitations, and contact information.
