EasyManua.ls Logo

Honeywell FocusPRO TH6110D1005/U - Battery replacement; Battery Replacement Guide; Customer assistance; Customer Assistance Information

Honeywell FocusPRO TH6110D1005/U
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
For assistance with this product, please
visit yourhome.honeywell.com.
Or call Honeywell Customer Care toll-
free at 1-800-468-1502.
Customer assistance
Turn thermostat over to find
model number and date code.
Press and pull to remove.
CAUTION
Equipment damage hazard
To prevent possible compressor damage, do not operate cooling system
when outdoor temperature is below 50°F (10°C).
xxxxxxx xxxxxxx
MCR29468
Replace Battery
MCR29467
Batteries are optional (to provide
backup power) if your thermostat
was wired to run on AC power when
installed.
Install fresh batteries immediately when
the REPLACE BATTERY warning
begins flashing. The warning flashes
about two months before the batteries
are depleted.
Even if the warning does not appear,
you should replace batteries once a
year, or before leaving home for more
than a month.
If batteries are inserted within two
minutes, the time and day will not
have to be reset. All other settings are
permanently stored in memory, and do
not require battery power.
Battery replacement
Insert fresh AA alkaline
batteries, then reinstall
battery holder.
Press and pull to remove.

Related product manuals