FocusPROTM TH61 lOD/TH6220D Programmable Thermostat
Heating or o Press SYSTEMbutton to set system to Heat. Make sure the temperature
cooling system is set higher than the Inside temperature.
does not respond
* Press SYSTEMbutton to set system to Cool. Make sure the temperature
is set lower than the Inside temperature.
* Check circuit breaker and reset if necessary.
, Make sure power switch at heating & cooling system is on.
* Make sure furnace door is closed securely.
, Wait 5 minutes for the system to respond.
_=Cool On" or
"Heat On" is
flashing
* Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 15).
19
To Next Page
Loading...
