FocusPRO TM TH61 lOD/TH6220D Programmable Thermostat
Your new thermostat is pre-programmed and read?, to go.All you have to do is set
the time and day.Then check the settings below and change if needed:
1 Set time and day (required for proper operation) ................................ See page 6
2 Select fan setting (Auto/On): Preset to Auto ...................... To change, see page 7
3 Select system setting (Heat/Cool): Preset to Heat .............. To change, see page 8
4 Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pro) .............................................. To change, see pages 9-11
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 12-13).
To Next Page
Loading...
