Honeywell H46C-F User Manual

Honeywell
THESE HUMIDITY CONTROLLERS PRO-
VIDE AUTOMATIC CONTROL OF A HU-
MIDIFIER OR A DEHUMIDIFIER FOR DE-
HUMIDIFICATION AND MILDEW CON-
TROL IN AIR CONDITIONING SYSTEMS.
ALL MODELS ARE SUPPLIED WITH COV-
ER AND CONTROL KNOB FOR WALL
MOUNTING.
❑ Cover of impact-resistant, molded
plastic.
❑ Sensing element of thin, moisture sensi-
tive nylon ribbon provides reliable opera-
tion even when ambient temperature con-
ditions change.
❑ Fully enclosed, dust-free, spst, snap
switch.
❑ Large, easy-to-read scaleplate on face
of controller.
❑ Positive ON and OFF setting positions
permit manual operation of the controlled
equipment.
S.M.
Form Number 60-2097—2
REV. 1O-87O
@Honeywell Inc. 1987

Honeywell H46C-F Specifications

General

Model	H46C-F
Material	Plastic
Product Type	Stud Finder
Power Source	Battery
Type	Stud Sensor

Summary

Specifications

Tradeline Models

Details on Tradeline models, their packaging, and features.

Standard Models

Specifications for standard humidity controller models.

Ordering Information

Electrical Rating

Installation

Mounting

Instructions for mounting the humidity controllers.

Wiring

Guidelines for wiring the humidity controllers.

Operation and Checkout

H46C & E Dehumidify Controllers

Explains how H46C and E models control dehumidifiers.

H46D & F Humidity Controllers

Explains how H46D and F models control humidifiers.

Checkout

Procedures for verifying system operation after installation.