Honeywell HEN321 4 Series User Manual

Performance Series Network Video Recorder User Guide
66
To configure 3G wireless connections
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*
4/HEN321*4/HEN642*4/HEN643*4.
1. Go to Main Menu  Setting  NETWORK  3G, the following window is displayed:
Figure 7-5 Network 3G Window
2. On the 3G page, you can configure the following settings:
Enable: Select or clear the check box to enable or disable 3G wireless connection using
the selected wireless network adapter.
3G Network: Select the wireless network adapter name.
Network Type: Select the network type that meets your requirements.
APN: Select the wireless connection server that you want to use to access the wireless
network.
AUTH: Select the authentication mode that you want to use to access the wireless
network: PAP or CHAP.
Dial No.: Enter the 3G network dial-up number that you received from your Internet
service provider.
User Name: Enter a user name for logging on to the 3G network.
User Password: Enter a password for logging on to the 3G network.
Dial: Click Dial to manually enable or disable the 3G network connection.
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click OK.

Honeywell HEN321 4 Series Specifications

General

Brand	Honeywell
Model	HEN321 4 Series
Category	Network Hardware
Language	English