Need help?Do you have a question about the Honeywell HEN642 4 Series and is the answer not in the manual?
General| Series | 4 Series |
|---|---|
| Category | Network Hardware |
| Product Type | Ethernet Switch |
| Port Type | RJ45 |
| Humidity | 10% to 90% non-condensing |
Guide on how to reset the NVR's administrator password.
Walkthrough of the NVR configuration using the startup wizard.
Detailed instructions for operating PTZ cameras connected to the NVR.
Setting up schedules for automatic video recording.
Instructions for backing up recorded video and snapshots.
Adjusting camera image parameters like brightness, contrast, and hue.
Setting video encoding parameters for primary and secondary streams.
Setting up the NVR's IP address, subnet mask, and gateway.
Setting up motion detection regions, periods, and event actions.
Configuring settings to generate an alarm for video loss detection.
Setting up face detection to identify and capture human faces in video.
Configuring the feature to count people passing through or appearing in video.
Managing user accounts, groups, and their privileges.
Configuring IP filtering to allow or block specific sites from accessing the NVR.
Instructions for upgrading the NVR system firmware locally.
Setting up various event detection configurations like motion and face detection.
Managing storage schedules and settings for recording and snapshots.
Steps to diagnose and resolve issues when the NVR fails to power on.
Troubleshooting steps for NVR shutdowns or operational halts.
To Next Page