Honeywell HPF870 Series - Fan Operation and Features; HF710 & HPF870 Operation; HF715 Operation

4
HF710 & HPF870 OPERATION
• Be sure the fan is in the OFF position.
• Place your fan on a dry, level surface.
• Plug the power cord into a polarized 120 volt AC wall outlet.
• To operate, turn the control knob to the desired fan speed:
HIGH(
), MEDIUM ( ) or LOW ( ) (Fig. 4)
• To activate wide area oscillation feature, press the
(
) Oscillation button once. Press the Oscillation button
again to turn the Oscillation feature off.
• Adjust the fan to the desired angular air output direction.
Fan head pivots 90 degrees.
• To move the fan, turn the fan OFF (
) and pick it up by the
handle located on the back of the fan. (Fig. 5)
• Be sure the fan is in the OFF position.
• Place your fan on a dry, level surface.
• Plug the power cord into a polarized 120 volt AC wall outlet.
• On/Off push the (
) button. The unit will default to the
HIGH fan speed.
• To operate, press the (
)button to the desired fan speed:
HIGH (
), MEDIUM ( ) or LOW ( ). LEDs will light each speed
as you press the (
) button to change fan speed. (Fig. 6)
• To activate wide area oscillation feature, press the Oscillation
button once (
). Press the Oscillation button again to turn the
Oscillation feature off. (Fig. 7)
• To activate the AutoOff Timer option choose from 1,2 or 4 hour
settings by pressing the Timer (
) button.
For 1 hour: Press the Timer button (
) once.
For 2 hours: Press the Timer button (
) twice.
For 4 hours: Press the Timer button (
) a third time.
Press the Timer button a fourth time to turn the Timer feature off.
• Adjust the fan to the desired angular air output direction.
Fan head pivots 90 degrees.
• To move the fan, turn the fan OFF and pick it up by the handle
located on the back of the fan. (Fig. 8)
HF715 OPERATION
Fig. 4
Fig. 5
Fig. 7
Fig. 6
Fig. 8