Document 900.0344 – 02/06 – Rev 1.00
HRDE4X4 Front Panel Operator Guide
1 Easily Monitoring Live Video and Audio
2 Quick Search to Find Incident Video
3 Using Timeline Search
Only audio from the selected camera will
be heard. The Audio Out connection on
the back of the unit must be connected
to an amplified speaker to hear audio.
In single channel view only:
Press SEQ to automatically cycle
through each camera view.
Press SEQ again to stop cycling.
Press numbered arrow
key 1 – 4 to select and
display camera 1 – 4.
Press SEL to display 4
(quad) cameras
Press
Timeline Search is easiest.
Use Go To if you know the approximate incident time.
Use Event Search for motion or alarm video.
Use arrow keys
to select the
search method
To change the month, press
__REW, FF``. Days colored
red have saved video.
Use arrow keys to select the
day to play. Press SEL.
Use arrow keys to move
the vertical yellow bar to
the Hour and Minute to
play back. Press SEL.
Red line = Video recorded
Green line = Audio recorded
To Next Page
Need help?
General
