Video Systems
www.honeywellvideo.com
+1.800.796.CCTV (North America only)
© 2006 Honeywell International Inc.
4 Playback Video and Audio
5 A. Mark Evidence for Archiving B. Copy to USB Memory Stick
6 Play and Review Evidence AVI on Microsoft® Windows XP/2000
Play Cameras in
Quad (4). Camera
displayed with yellow
lettering plays audio.
Back to Search
Select one
camera to
play. Audio is
only heard for
that camera.
n Play/Pause video
o, r Fast forward/reverse
Click to toggle speed 2 – 16x
Speed shows at the bottom of the monitor
Audio only plays in lowest (`) speed
p, q In Pause: Advance/Reverse 1 image
In Play: Jump 1 minute forward/reverse
o
q
r
n
p
5A Locate an incident (steps 2, 3, 4).
Display a single camera to Archive.
Press ARCH, select STILL or VIDEO.
You will see the message
VIDEO OK.
Press ESC to return to the Search screen.
5B Put USB Memory stick in the front panel.
Select ARCHIVE search and press SEL.
Select the day of the incident and press SEL.
Highlight the clip/still image name.
Press SEL to play.
Press ARCH, select YES to save.
When finished you will see the message
SAVE SUCCESS.
5B
Put the USB Stick in a Windows PC.
Double-click the AVI file to launch it.
Use Windows Media Player to play the clip.
The folder uses a YearMonthDay name
(20060203 = 2006 February 03).
The file uses a HourMinSecCamera name
(130808C1 = Starts at 13:08:08 Camera 1).
Playback using VCR-like controls.
Single images are saved in JPG format and
can be viewed with Internet Explorer.
AVI files are played with Windows Media Player.
It may be necessary to install a CODEC on your PC to play clips.
See the User Manual or contact technical support for assistance
installing CODECs, in North America call 1.800.796.CCTV.
Folder
Video file
To Previous Page
Loading...
