Honeywell HT-380BP - High Velocity Air Circulator Floor Fan - HT-380 Series Operation; HT-380 Operation Steps; HT-8800;HT-9700 Series Operation; HT-8800;HT-9700 Operation Steps

HT-380 SERIES OPERATION
• Be sure the fan is in the OFF position.
• Place your fan on a dry, level surface.
• Plug the power cord into a polarized 120 volt AC wall outlet.
• Each fan is independently operated. To operate the fans, turn the control knob to the desired
fan speed: HT-9700 series-2 speeds, High (
II) or Low (I) or HT-8800 series-3 speeds, High (III),
Medium (
II), or Low (I) (Fig. 5).
• Adjust the fans to the desired position (Fig. 6).
• To move the fan, turn the fan OFF (
O) and pick it up by the reach through handle (Fig. 7).
HT-8800/HT-9700 SERIES OPERATION
Fig. 5 Fig. 6 Fig. 7
Be sure the fan is in the OFF position.
• Place your fan on a dry, level surface.
• Plug the power cord into a polarized 120 volt AC wall outlet.
• To operate your Tech Fan, press the control button once to turn the fan on in high speed (
III), press a
second time to change to medium speed (
II), press a third time to change fan to the low speed (I),
press a fourth time to turn the fan off (Fig. 2a & 2b).
• Adjust the fan to the desired position (Fig. 3).
• To move the fan, turn the fan OFF and pick it up by the handle (Fig. 4).
Fig. 3 Fig. 4Fig. 2a Fig. 2b
High
Medium
Low
HT-380BPC, 8800BPC, 9700C OM.qxd 10/16/08 11:42 AM Page 3