EasyManua.ls Logo

Honeywell HT-900 - Instructions for Use and Care; General Safety Precautions; Usage and Operation Guidelines

Honeywell HT-900
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS BEFORE
USING THIS FAN.
When using electrical
appliances, basic safety
precautions should
always be followed,
including the following:
Use this fan only as
described in this manual.
Other use not recom-
mended may cause fire,
electric shock or injury.
This product is intend-
ed for household, indus-
trial and commercial use
ONLY. It is not intended
for outside use.
High Velocity fans are
designed to create rapid
air movement; therefore,
make sure the fan is not
placed near drapes, cur-
tains, or any objects that
may be drawn into the
fan inlet.
This fan requires a
grounded 120 Volt power
source (3 prong recepta-
cles). NEVER connect the
fan to any power source
other than a 120 volt
alternating current polar-
ized outlet.
To protect against elec-
trical shock, do not place
fan in window, immerse
unit, plug or cord in
water or spray with liq-
uids.
This fan is equipped
with a polarized alternat-
ing current line plug (a
plug having one blade
wider than the other).
This plug will fit into the
power outlet only one
way. This is a safety fea-
ture. If you are unable to
insert the plug fully into
the outlet, try reversing
the plug. If the plug
should still fail to fit, con-
tact an electrician to
replace the obsolete out-
let. Do not defeat the
safety purpose of the
polarized plug.
Close supervision is
necessary when any
appliance is used by or
near children.
Unplug the fan from the
outlet when not in use,
when moving fan from
one location to another
and before cleaning.
Do not operate the fan
in the presence of explo-
sive and/or flammable
fumes.
Do not place the fan or
any parts near an open
flame, cooking or other
heating appliance.
Do not operate the fan
with a damaged cord,
INSTRUCTIONS F0R USE AND CARE
plug, after a malfunction
or if dropped or damaged
in any manner.
(See warranty.)
Avoid contact with
moving fan parts.
To disconnect, grip the
plug and pull it from the
wall outlet. Never yank
the cord.
The use of attachments
not recommended by
Honeywell Consumer
Products may be
hazardous.
Always use on a dry,
level surface.
Do not hang or mount
fan on a wall or ceiling.
Do not operate if the
fan housing is removed
or damaged.
Do not operate without
fan grilles properly in
place.
A loose fit between the
AC outlet and plug may
cause overheating of the
plug. Have a qualified
electrician replace the
outlet.
WARNING: To reduce the
risk of fire or electrical
shock, do not use this
fan with any solid state
speed control device.

Related product manuals