Honeywell HY-023 Series - HY-013 Series Operation Instructions; HY-023 Series Operation Instructions

4
HY-013 SERIES OPERATION INSTRUCTIONS
• Be sure your fan is in the OFF position by pressing the
off button. ( )
• Place the fan on a level and dry surface.
• Plug the power cord into a polarized 120 Volt AC wall outlet.
• To operate, press the appropriate speed control option: High ( ),
Medium ( ), or Low ( ) (Fig. 13).
• To activate or disengage the fan oscillation, press the oscillation
button. ( ) (Fig 14).
• Operate the automatic shut-off timer feature by turning the timer
knob to the desired setting of 10 to 120 minutes (Fig 15).
• To turn on the fan after
automatic shut-off, turn the
knob counterclockwise
to the ON position
.
• To turn the fan off press
the Off button once.
( )
Fig. 13
Fig. 14
Fig. 15
HY-023 SERIES OPERATION INSTRUCTIONS
• Be sure your fan is in the OFF position by pressing the
off button. ( )
• Place the fan on a level and dry surface.
• Plug the power cord into a polarized 120 Volt AC wall outlet.
• To turn the fan on, press the Power button ( ) located on
the left side of the control panel.
• To select fan speed, press the appropriate Speed Control
button until the desired speed is selected:
High ( ), Medium ( ), or Low ( ) (Fig. 16).
• To activate or disengage the fan oscillation, press the
oscillation button ( ). Press the Oscillation button again to
turn the Oscillation feature off (Fig 17).
Fig. 16
Fig. 17