Honeywell SIGNATURE HY-033 - User Manual

SIGNATURE SERIES TRIPLE TOWER FAN
Model HY-033
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Use this fan only as described in this manual.
Other use not recommended may cause fire,
electric shock or injury to persons.
2. This product is intended for household use ONLY
and not for commercial, industrial or outdoor use.
3. To protect against electric shock, do not place fan
in window, immerse unit, plug or cord in water or
spray with liquids.
4. This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of shock,
this plug is intended to fit only one way in a
polarized outlet. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT attempt to
defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan to the OFF position and unplug the
fan from the outlet when not in use, when moving
the fan from one location to another and before
cleaning.
7. To disconnect the fan, first turn control to the OFF
position, grip the plug and pull it from the wall
outlet. Never pull by the cord.
8. Do not operate the fan in the presence of
explosive and/or flammable fumes.
9. Do not place the fan or any parts near an open
flame, cooking or other heating appliance.
10. Do not operate the fan with a damaged cord or
plug or if the product malfunctions, is dropped or
damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended by the
manufacturer may be hazardous.
13. Place the fan on a dry level surface.
14. Turn the fan OFF and unplug it before removing
the fan grille. Do not plug in or operate the fan if
the grille is removed or not properly assembled.
15. Do not operate if the fan housing is removed or
damaged.
16. A loose fit between the AC outlet (receptacle) and
plug may cause overheating and a distortion of
the plug. Contact a qualified electrician to replace
loose or worn outlet.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With Any
Solid-State Speed Control Device.
The Honeywell trademark is used by Kaz, Inc. under license from Honeywell Intellectual Properties, Inc.
HY-033 OM.qxd 1/25/06 3:54 PM Page 1

Honeywell SIGNATURE HY-033 Specifications

General

Brand	Honeywell
Model	SIGNATURE HY-033
Category	Fan
Language	English

Summary

Important Safety Instructions

General Safety Precautions

Follow basic precautions to reduce fire, electric shock, and injury risks when using electrical appliances.

Specific Safety Warning

Do not use this fan with any solid-state speed control device to reduce fire or electric shock risk.

Fan Assembly

Assembly Steps

Instructions for removing hand screw, inserting motor assembly into base, and tightening for upright fan use.

Fan Operation

Operating Instructions

Place on dry level surface, plug into outlet, operate fans independently, adjust direction, and move safely.

Cleaning and Storage

Cleaning Procedures

Use damp cloth, avoid water in motor housing, and do not use chemicals for cleaning the fan.

Front Grille Removal

Safely remove front grille using screws after power is off and unplugged for cleaning.

Storage Guidelines

Clean fan carefully, cover for dust protection, and store in a cool, dry place.

Consumer Relations and Warranty

Contacting Consumer Relations

Contact Kaz Consumer Relations for issues, not the store of purchase. Avoid self-repair to maintain warranty.

Warranty Details

5-year limited warranty for defects, exclusions for misuse, and instructions for return with shipping charges.