What to do if the Honeywell Rfid Systems reader is not found by Bluetooth?
If the host Bluetooth discovery can't find the Honeywell Rfid Systems reader, first ensure the reader is powered on by pressing the button and checking for a flashing blue LED. If it's on, try moving the reader closer to the host device, as it might be out of range.
Why nothing happens when I press the button on my Honeywell IH25 reader?
If nothing happens when you press the button on your Honeywell Rfid Systems reader, it could be due to a discharged battery. Try charging the reader. Alternatively, button actions might be disabled on the reader.
What to do if opening the Bluetooth virtual com port does not connect to the Honeywell Rfid Systems reader?
If opening the Bluetooth virtual COM port doesn't connect to the Honeywell Rfid Systems reader, it might be because the host is paired with a different Bluetooth device; ensure you pair with the correct reader. If that's not the issue, there may be an error with the host's Bluetooth function. Try warm booting the host. If problems persist, delete the reader from the favorites list and re-pair.
Why is my Honeywell IH25 Rfid Systems flashing red, green, and amber?
A red flash or alternating green and amber flashes on your Honeywell Rfid Systems reader indicates a battery fault. Replace the battery pack. Also, ensure you are charging the device within the recommended temperature range of 0°C - 45°C.
Details and diagrams of the IH25 Bluetooth UHF RFID Reader's physical components.
Step-by-step instructions for installing the battery into the IH25 reader.
Instructions on how to charge the IH25 reader using USB cable or docking station.
Procedure for fitting the mobile terminal into the bracket and attaching it to the reader.
Process for reading RFID tags using the IH25 reader and BccRFID application.
Explanation of the MODE button functions and status indicator lights on the IH25.
Describes the BccRFID Mobile Application for Android and its use with the IH25.
Steps to use the BccRFID Mobile Application for RFID operations on a mobile device.
Guide on how to use the BccRFID application for basic RFID operations.
Navigating the BccRFID Mobile Application through the Home screen interface.
Establishing a connection between the IH25 reader and the mobile device.
Procedure for scanning RFID tags using the BccRFID application.
Selecting and editing scanned RFID tags within the BccRFID application.
Writing data to RFID tags, including memory bank and address selection.
Locking RFID tags, specifying lock bank, lock type, and access password.
Functionality to locate specific RFID tags using the BccRFID application.
Configuring common application settings like scan mode and sound.
Information about the BccRFID application software version and copyright.
Tips for maintaining the IH25 Reader for trouble-free service and avoiding temperature extremes.
Solutions for common issues encountered with the IH25 reader, including symptoms and actions.
General| Brand | Honeywell |
|---|---|
| Model | IH25 |
| Category | Rfid Systems |
| Language | English |
To Next Page
