Need help?Do you have a question about the Honeywell KAP 140 and is the answer not in the manual?
General| Manufacturer | Honeywell |
|---|---|
| YD | Yaw Damper (Optional) |
| Type | Autopilot System |
| Applicable Aircraft | General aviation and light aircraft |
| Pitch Modes | Altitude Hold, Vertical Speed |
| Certification | TSO |
| Modes | Basic autopilot functions, altitude hold, vertical speed, heading select, navigation tracking, approach mode |
| Roll Modes | Wing leveler, Heading hold, NAV tracking |
Overviews the KAP 140 Single, Two Axis, and Two Axis/Altitude Preselect autopilot systems.
Explains system diagrams, component relationships, and preflight test procedures for the KAP 140.
Details fundamental modes like ROL, HDG, NAV, APR, and REV for single-axis operation.
Covers takeoff, climb, GPS capture, and LOC approaches for single-axis use.
Describes lateral modes (HDG, NAV, APR, REV) and vertical modes (VS, ALT) for two-axis systems.
Details procedures for takeoff, climb, and level off using the two-axis autopilot.
Covers GPS capture, LOC approaches, and ILS approaches for two-axis systems.
Covers lateral modes, vertical modes, and altitude preselect functions.
Explains altitude alerting, preselect, and voice message features.
Describes the KI 525A HSI display and its functions for navigation.
Covers slaving, operation, and abnormal circumstances of the compass system.
Details procedures for handling autopilot or trim malfunctions.
To Next Page
