Honeywell Lynx Plus Series User Manual

– 31 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Clock/Calendar
4. The system will announce, “Enter two-digit month, press ADD to accept, ESCAPE to quit”.
1
Month
Month (The current month will display.)
Enter the 2-digit month designation (i.e., 01-12).
Press [ADD] to accept the entry and continue to the day selection.
Press [ESCAPE] to back up to Minute selection.
5. The system will announce, “Enter two-digit day, press ADD to accept, ESCAPE to quit”.
01
Day
Day (The current day will display.)
Enter the 2-digit day of the month (i.e., 01-31).
Press [ADD] to accept the entry and continue to the year setting.
Press [ESCAPE] to back up to Month selection.
6. The system will announce, “Enter two-digit year, press ADD to accept, ESCAPE to quit”.
09
Year
Year (The current year will display.)
Enter the last two digits of the year (i.e., 00-99).
Press [ADD] to accept the entry and exit Clock-Setting mode (keypad beeps 4 times).
Press [ESCAPE] to back up to Day selection.

Honeywell Lynx Plus Series Specifications

General

Wireless Frequency	345 MHz
Control Panel Type	Self-contained
Zones	Up to 40 zones
Keypad	Integrated
Communication	POTS, optional GSM, IP
Alarm Sounder	Built-in alarm sounder
Remote Control	Yes, via Total Connect 2.0 app
Keyfobs	Supports keyfobs
Siren Output	95dB built-in siren
Compatibility	Compatible with Honeywell 5800 series wireless devices