Honeywell Lynx Plus Series User Manual

– 50 –
SUMMARY
SUMMARY SUMMARY
SUMMARY O
OO
OF AUDIBLE NOTIFICATION
F AUDIBLE NOTIFICATIONF AUDIBLE NOTIFICATION
F AUDIBLE NOTIFICATION
Additional Announcements:
Pressing STATUS key once will announce the following primary messages, depending on
the system’s status at the time:
Disarmed–Ready to Arm [check system]
Disarmed [not ready to arm]
Armed [away] [stay] [instant] [check system] [exit now]
Pressing the STATUS key twice will announce the following secondary messages, depending
on the system’s status at the time:
Fire Alarm + zone voice descriptor
Alarm + zone voice descriptor
Carbon Monoxide Alarm + zone voice descriptor
Carbon Monoxide Fault + zone voice descriptor
Fire Fault + zone voice descriptor
Fault + zone voice descriptor Alarm + zone voice descriptor
Low Battery + zone voice descriptor Fire Fault + zone voice descriptor
System Low Battery
Check System
AC Loss
Zones Bypassed
Chime
NOTE: If there are no secondary messages, the primary status messages will be announced.

Honeywell Lynx Plus Series Specifications

General

Wireless Frequency	345 MHz
Control Panel Type	Self-contained
Zones	Up to 40 zones
Keypad	Integrated
Communication	POTS, optional GSM, IP
Alarm Sounder	Built-in alarm sounder
Remote Control	Yes, via Total Connect 2.0 app
Keyfobs	Supports keyfobs
Siren Output	95dB built-in siren
Compatibility	Compatible with Honeywell 5800 series wireless devices