Honeywell LYNX Touch L5200 Series Programming Guide

Screen Display Function & Programming Options
- 11 -
Communicator Type
None
Communicator Type
None
GSM
WiFi
WiFi & GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Phone Number
Enter the Secondary Central Station Phone Number (Up to 20 digits)
Communicator Type
None
Communicator Type
None
GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Phone Number
Enter the Secondary Central Station Phone Number
Account Number
FFFF
Account Number
Enter the Secondary Central Station Account Number
Dynamic Priority
None
Dynamic Priority
Redundant Reports
Preferred Telco
Preferred Radio
Note: If Preferred Telco or Preferred Radio is selected the Dynamic Delay option will be displayed.
Dynamic Delay
None
Dynamic Delay
None
15 Seconds
30 Seconds
60 Seconds
90 Seconds
Report All
Press to Report All
Report All
Press to Report All
Report All Set
Report Alarms
Enabled
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Report Open/Close
Disabled
Enabled
Report Tests
Enabled
Report Tests
Disabled
Enabled
Follow Me Phone 1
Follow Me Phone 1 (This feature is not available on the LYNX Touch L7000CN)
Choose from the following options:
Phone Type Phone Number
Report All Report Alarms
Report Troubles Report Open/Close
Report Tests

Honeywell LYNX Touch L5200 Series Specifications

General

Brand	Honeywell
Model	LYNX Touch L5200 Series
Category	Security System
Language	English