Honeywell LYNXR User Manual

–42–
Voice Prompt Programming
!
All four digits of the Central Station Account number must be entered. If ten-digit format is selected, all ten digits
must be entered.
To Add Second Central Station Phone Number
Select
"Second Central
Station Phone
Number"
Press
[SELECT]
Enter second
central station
phone number
(up to 24 digits)
Press
[ADD]
Enter second
central station
account number
(up to 4 digits)
Press
[ADD]
To Add Second Central Station Account Number
Select
"Second Central
Station Account
Number"
Press
[SELECT]
Enter second
central station
account number
(up to 4 or 10 digits)
Press
[ADD]
Refer to the LYNXR Series Installation and Setup Guide to view the complete set of Template (default table) selections.
To Program a Template (Default Table)
Select
"Templates"
Press
[SELECT]
Select
template
See (6)
Press
[SELECT]
(6) Template selections
Template 1
Template 2
Template 3
Template 4
To Enter Expert Programming Mode
!
Once you have entered the Expert Programming Mode, the [ESCAPE] key can be used to return to the Voice Prompt
Programming mode.
Select
"Expert
programming
mode"
Press
[SELECT]
System switches to Expert
Programming Mode
(Refer to the LYNXR
Series Installation and
Setup Guide or the
LYNXR Series
Programming Guide for
additional programming
instructions)
WWW.DIYALARMFORUM.COM
WWW.DIYALARMFORUM.COM

Honeywell LYNXR Specifications

General

Brand	Honeywell
Model	LYNXR
Category	Security System
Language	English