Honeywell LYNXR - Page 62

– 62 –
✻80 DEFAULT TABLE: APPLIES TO DEFAULT TABLE 4 (devices 2-7 have no default values)
Start Stop
Device Number Action Event Zone List
Zone Type
System Operation
Restore of
Zone List
Zone type
System operation
1 2 2 1 2
8** 2 33 36
** NOTE: If using an X-10 Powerhouse Security SH10A siren as device 8, you must change the device action default to “3” if using default
table 4.
✻80 DEFAULT TABLE: APPLIES TO DEFAULT TABLE 1 and 2 (devices 1-7 have no default values)
Start Stop
Device Number Action Event Zone List
Zone Type
System Operation
Restore of
Zone List
Zone type
System operation
8** 2 33 36
✻81 ZONE LIST FOR OUTPUT DEVICES DEFAULT TABLE: Applies To Default Table 1 - 4.
Zone List 1 28, 32
Zone List 2 29, 33
Zone List 3 2, 3
WWW.DIYALARMFORUM.COM
WWW.DIYALARMFORUM.COM