Need help?Do you have a question about the Honeywell NOTIFIER AA-100 and is the answer not in the manual?
General| Frequency Response | 60 Hz to 15 kHz |
|---|---|
| Dimensions | 14.0" (35.6 cm) H x 12.5" (31.8 cm) W x 3.0" (7.6 cm) D |
| Weight | 14 lbs (6.4 kg) |
| Power Output | 100 Watts |
| Speaker Output | 25V, 70V |
Warning regarding radio frequency energy emissions and potential interference in commercial environments.
States compliance with Canadian limits for digital apparatus radiation noise emissions.
Lists NFPA, UL, ULC, NEC, and local codes applicable to the system.
Details compliance with UL 864 standards for fire alarm control equipment, including certification.
Provides a list of documents for other components of a Digital Voice Command system.
Explains symbols used for safety cautions and warnings in the manual, highlighting potential hazards.
Describes the three AA-series audio amplifier models and their general features like supervision and backup.
Provides a functional overview of how analog audio amplifiers integrate into a Digital Voice Command system.
Details AC and DC power requirements and battery calculations for the amplifiers.
Explains how to connect the DVC-AO option board to AA-Series audio amplifiers for audio messages.
Provides instructions for mounting and connecting the AA-30 audio amplifier.
Describes the operational aspects of the AA-30, including power handling and trouble indications.
Details the steps for installing the AA-100 and AA-120 audio amplifiers, including mounting and connections.
Covers general operation, LED conditions, and backup tone selection for AA-100/AA-120 amplifiers.
Explains how to adjust the audio gain for optimal output using a rotary switch to compensate for line losses.
Provides diagrams and instructions for wiring two or more audio amplifiers together for various configurations.
To Next Page