Need help?Do you have a question about the Honeywell NOTIFIER NFC-50/100 and is the answer not in the manual?
Critical warning regarding power disconnection before servicing.
Emphasizes re-testing after system modifications to ensure proper operation.
Covers environmental conditions, wire size, static sensitivity, and proper handling.
Details modular design, power output, input/output capabilities, and integrations.
Outlines specifications for various circuits like AC power, relays, NAC, speaker, data bus, etc.
Describes push-button controls and LED indicators on the main console.
Lists and briefly describes the main control board and display board.
Details optional modules like amplifiers, expanders, transformers, and telephones.
States compliance with UL 464 for low frequency sounders.
Covers cabinet mounting methods (semi-flush or surface).
Instructions for installing the backbox, including static sensitivity precautions.
Details AC power connection and earth ground requirements.
Explains the special application auxiliary DC power output.
Covers CMD inputs, external audio input, NAC follower, and night ring inputs.
Details relays, speaker circuits, NAC, speaker volume control, and FACP data bus connections.
Wiring instructions for connecting the local operator console.
Wiring instructions for connecting the remote page unit.
Wiring instructions for connecting the remote microphone.
Information on connecting distributed audio amplifiers.
Guidance on using shielded cable and terminating shields.
Explains separation and routing for power-limited wiring.
Instructions for installing optional circuit expander and audio amplifier modules.
Details dipswitch settings for addressing external devices.
Checklist for secure installation and maintenance practices.
Overview of the main menu for programming options.
Settings for login passwords and inactivity timeouts.
Configuration for unit operation, FACP data bus, and NAC settings.
Configuring addresses for remote consoles and amplifiers.
Programming assignments, tones, durations, and repeat cycles for messages.
Access to message recording and USB file transfer utilities.
Instructions for enabling and performing message recording.
Procedures for saving and recalling programming via USB.
Viewing system information like version and history without login.
Detailed steps for recording messages via microphone or audio input.
How FACPs trigger audio system functions via data bus.
Explains the layout and function of keypad labels.
Describes the functions of the push-button keys on the panel.
Lists and explains the meaning of various LED indicators.
General operating procedures and system responses.
Steps for broadcasting pages using the microphone.
Procedures for manually selecting and playing messages.
System actions during a fire alarm condition.
System actions during a mass notification event.
How the system responds to and indicates trouble conditions.
How the external audio input functions for music, paging, or night ring.
Basic setup steps for systems up to 50W.
Basic setup steps for systems up to 100W.
Basic setup steps for systems over 100W.
Introduction to power supply calculation steps.
Guidance on calculating AC branch circuit requirements.
Steps to calculate system current draw for standby and alarm.
Method for determining the required battery size in ampere-hours.
Explains audio room isolator modules (AIM-1A, RSM-1A).
Configuration steps for Canadian applications.
Illustrates typical applications for audio isolator modules.
General| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
|---|---|
| Humidity Range | 10% to 93% non-condensing |
| Operating Voltage | 24 VDC |
| Compatibility | NOTIFIER Fire Alarm Control Panels |
| Certifications | UL |
To Next Page
