23 69-2740EFS—01
Adjusting humidification settings
1 Touch MENU and select Humidification.
2 Select Auto.
3 Move the slider bar to select humidity level.
4 Touch More Settings if frost or condensation
appears on the windows. Use a lower
number to prevent frost or condensation.
Use a higher number if indoor air is too
dry. Window Protection limits the amount of
humidity to prevent frost or condensation
on windows. See notes below.
5 Touch Done to save your settings. Touch
Cancel to ignore changes.
NOTE: The thermostat will not run the
humidifier when the indoor humidity
has reached the “Window Limit” that is
displayed on the screen.
NOTE: Window Protection is available only
if an outdoor air sensor is installed.
MENU
Humidifica�on
More
Se�ngs
To Next Page
Loading...
